This is a breakout
board for the ST's dual-axis LPY503AL gyro. The LPY503AL measures
angular velocity along the
pitch and
yaw axes with a full scale of
±30°/s. Two different analog outputs are provided for both the x- and
z- axes - one 1x amplified and the other 4x amplified.
A
regulated voltage between 2.7 and 3.6VDC should be supplied to the
power pins. We have the filtering circuits all set up; you'll just need
to connect the outputs to an ADC, and you're ready to go.
This breakout board includes
the gyro and all necessary filtering capacitors as shown. The 1x and 4x
amplified outputs of both axes are connected to the 0.1" pitch headers,
along with the power-down, self-test, high-pass filter reset, and power
pins.
Features:- 2.7 to 3.6VDC power supply
- Dual axis, pitch and yaw sensing
- 1x and 4x amplified outputs for each axis
- Low power consumption
- All necessary filtering components included
- Access to power-down, self-test, and high-pass filter reset pins
Dimensions: 0.6x0.7"
Documents: